Publicaciones

07 jul 2020
Energía eléctrica y renovables

Problems with power quality at electrical installations
30 jun 2020
Minería y metalurgia

Succesfully completing your artificial intelligence project in the mining sector
- Arbi Bouchoucha, Ph. D.
  
  Advanced Data Analyst
25 may 2020
Energía eléctrica y renovables

Get more from the grid
21 may 2020
Energía eléctrica y renovables

Motion amplification: A new tool for vibration diagnosis
20 may 2020
Otras Industrias

Electrical classification of hazardous locations: Wastewater treatment plants

According to the NFPA-820 2020 standard [1], most pumping stations, spaces and buildings that make up a wastewater treatment plant must be considered hazardous locations.
14 may 2020
Energía eléctrica y renovables

Operating remotely: Using cameras as sensor (CAMAAS)
- Serge Benoit, P.Eng.
  
  Principal Advisor, Automation
12 may 2020
Energía eléctrica y renovables

Are your lifting devices safe?
- Jonathan Hamel, P.Eng.
  
  Senior Engineer, Structural
12 may 2020
Otras Industrias

Ventilation of isolation rooms
- Hugues Châteauneuf, P.Eng.
  
  Senior Consulting Expert, Ventilation, Hazardous Locations, Explosion Hazards
06 may 2020
Energía eléctrica y renovables

Secure remote access to production networks: The advantages of VDI technology
- Michaël Racine
  
  Telecommunications and Networking Analyst
04 may 2020
Energía eléctrica y renovables

Operating remotely: Intelligent distributed optimization (IDO) to get the most from your technological tools

One of the major challenges associated with remote sites is the difficulty of ensuring qualified personnel are present to ensure optimal operation. Lack of strong technical leadership can compromise operational performance. This deficiency could have greater consequences during commissioning. As such, it may appear worthwhile to use specialized data analysis software that automates performance monitoring and problem detection.
04 may 2020
Minería y metalurgia

Slurry pump design: What you need to know
- Roman Dorfman, P.Eng.
  
  Principal Engineer, Piping
30 abr 2020
Energía eléctrica y renovables

Civil or structural engineering?
27 abr 2020
Energía eléctrica y renovables

Hazardous locations: The game rules - Part 2
- Hugues Châteauneuf, P.Eng.
  
  Senior Consulting Expert, Ventilation, Hazardous Locations, Explosion Hazards
21 abr 2020
Energía eléctrica y renovables

COVID-19: 3D VIRTUAL VISITS, AS IF YOU WERE THERE
- Mathieu Brochu
  
  Visual simulation specialist
16 abr 2020
Minería y metalurgia

Passive water treatment in the mining sector

In 2021, new standards for maximum concentrations of harmful substances that may be released into the environment will take effect under the Metal and Diamond Mining Effluent Regulations [1]. Many mining clients are opting for water treatment methods and technologies that can be easily adapted to these new standards. Given the current situation, clients prefer technologies that are both efficient and economically viable. This article explores passive water treatment technologies which have tangible benefits in terms of capital costs, but which also could involve risks that need to be considered.
Jean-Louis Bandu, P.Eng., M.Env., M.P.M., P.M.P.

Senior Engineer, Earth and Infrastructure
14 abr 2020
Energía eléctrica y renovables

Operating industrial electrical networks remotely
07 abr 2020
Energía eléctrica y renovables

The key elements to field testing power transformers
- Gregory Sines, P.Eng.
  
  Electrical Engineer
01 abr 2020
Energía eléctrica y renovables

Operating remote assets
- Jean-François Beaulieu
  
  Director, Digital Consultant
05 mar 2020
Otras Industrias

Hazardous locations: The game rules - Part 1
- Hugues Châteauneuf, P.Eng.
  
  Senior Consulting Expert, Ventilation, Hazardous Locations, Explosion Hazards
21 feb 2020
Energía eléctrica y renovables

Beyond IT. Think industrial cybersecurity.

According to an article published on the Canada News website, “Cybersecurity: Canadian businesses don’t feel the urge to act”, nearly half of Canadian companies have not seen fit to strengthen their IT security in 2019. However, this article refers only to information technology (IT) security, an area where practices are much more advanced than those of operational technology (OT), which is still in its infancy in terms of industrial security.
Marc Potvin, P.Eng.

Senior Engineer, ICS Cybersecurity
13 feb 2020
Minería y metalurgia

Slurry flow simulation with 3D computational fluid dynamics (CFD)
10 feb 2020
Energía eléctrica y renovables

The PRC-005-6 and TET-APE-N-0005 standards in Québec: Are you ready?
- Dominic Dubreuil, P.Eng.
  
  Electrical Engineer
06 feb 2020
Energía eléctrica y renovables

Getting started with an ICS cybersecurity program
- Pierre Janse Van Rensburg, GCIH
  
  Senior Consulting Expert, ICS Cybersecurity
05 feb 2020
Energía eléctrica y renovables

Authentication of 3D models by professional engineers: Moving away from 2D drawings
27 ene 2020
Biocombustibles, petróleo y gas

Improved methodology for liquid/liquid separation design

The purpose of this new design methodology is to improve on technology selection and equipment specification for bulk liquid/liquid phase separation at the “Primary Separation” stage of a process. It is critical for the primary separation unit to meet its target separation efficiency, since poor performance will impact negatively on any downstream treatment systems (i.e., secondary, tertiary separation stages) and possibly result in non-compliance with stream specifications. The two liquid phases are identified as “Light” (i.e., lower density liquid) and “Heavy” (i.e., higher density liquid) in Figure 1 since this procedure applies to any two immiscible liquids with different densities. In many cases the light phase is liquid hydrocarbon (i.e., oil) and the heavy phase is aqueous (i.e., water) and therefore this system is used as an example in the material below.
27 ene 2020
Energía eléctrica y renovables

Advanced data analysis: What is it and what is it used for?
- Arbi Bouchoucha, Ph. D.
  
  Advanced Data Analyst
18 dic 2019
Minería y metalurgia

Tailings disposal: Choosing the right technology
- Guylaine St-Jean, P.Eng.
  
  Senior Engineer, Industrial and Hydro
11 dic 2019
Energía eléctrica y renovables

Are you PRC-005-6 compliant ready?
04 dic 2019
Energía eléctrica y renovables

Is SD-WAN for everyone? Almost!
- Daniel Leblanc
  
  Telecommunications and Networking Analyst
27 nov 2019
Minería y metalurgia

How to properly prepare your data for a mineral resource estimate?

In most cases, when we receive a client database to perform 3D modelling or run an NI43-101 compliant resource estimate (or JORC), the data is incomplete or may contain errors. The following are examples of steps you can take before sending your database to modelling or resource geologists, either internally or to an independent firm to save time.